Tally on Cloud
Last updated
Last updated
When the tally is on the cloud then the user should have a static IP address and also for Fixed Port number.
You will get the static Ip address and fixed port from the tally service providers.
Go to Settings->Tally->Enter IP address in Tally host and port no. below that.You can also refer this link
ODBC port is always open
First-person to open up tally will get the odbc port, if he/she shuts tally then data won't sync.
Need to make sure the Tally serial number is also different for each client, else only 1 customer will be able to use the app.
Install tally in each folder & then give access of each tally folder to each client
Assign different ODBC port to each client
Need to make sure the Tally serial number is also different for each client, else only 1 customer will be able to use the app.
Check for the ODBC port no. in your tally it should be a fixed port because if you connect cloud tally through RDP you should have that same port no. in your tally. For the fixed port no, you can install a separate tally on another drive and configure the ODBC port over there.
The Ip has to be static and the Biz Analyst desktop installed should be on the same network. Check for the IP address if it has an open port or not and then try to connect it with the Biz Analyst app.
The solution is installing tally at 2 different locations. For the fixed port no, install a separate tally on another drive and configure the ODBC port over there.
Biz Analyst desktop app needs to be installed on a server machine. Enter the IP address of the server machine in the tally host.
No, If your tally is getting slow that may be because of these pointers,
If the tally is on the cloud then it requires a Fixed Port number from the service providers. To configure that port in tally follows the link below:
To configure that port in tally follows the link below: